The Best Gadget for Easy Metric Conversions in Building

The results of construction and repair work depend on the quality of markings. Therefore, every master uses a measuring tool to find vertically and horizontally. Previously, builders used mechanical devices that produced results with a large error. But now lasers can easily cope with such tasks. It draws clear lines at the angles desired by the user, which can be seen from tens of meters away. But if this is your first time encountering this device, it will be useful to read how a laser level works in metric conversions practice to apply your new knowledge in practice.

More about the tool

This level includes a laser complemented by a pendulum suspension. The equipment has an alignment function, so the master does not need to achieve geometrically correct results. Gravity will do it for him. That is, the device will draw perfectly straight lines and will even be able to display planes that will become the basis for building walls, floors, and ceilings.

Laser levels differ from each other in functionality. There are three types of metric conversion calculator devices:

  • Point type – models with basic capabilities. They can display only a point on the surface, so they are suitable for simple homework.
  • Linear type – middle-class levels with an affordable price. The devices draw lines vertically and horizontally. You can work with them at home and in a professional environment.
  • Rotary-type equipment cannot be called budget. It can form many planes, doing this in a range of 360 degrees and calculating in metric conversions. Professionals choose these laser levels.

Purpose of the level

The main task of these devices is to form beams and planes. The device helps to maintain horizontal and vertical lines when constructing house walls and horizontal partitions. The tool is used in repair work to correctly install floor coverings, finish walls, hang furniture, hang pictures, and perform other tasks.

Before the advent of the laser, the master had to work with plumb lines or hydraulic and bubble devices. These levels did not provide 100% accuracy of results. In addition, working with the equipment required special operator training and took a lot of time. Therefore, a beginner could not use such devices. With the invention of the laser, the situation changed radically. Now, even an amateur can work with the level. If you need to quickly use a calculator to calculate square footage or sizes, it is better to use the free online service OneCovert. The full metric conversions scale is presented there.

Basic instructions for using the device

How to do metric conversions in laser levels? Device control features depend on the model’s complexity and functionality. On average, use of any level begins with unlocking the gimbal, which locks to protect it from damage while being carried. Some models turn on immediately after opening.

The equipment must be installed on a level surface. It does not have to be perfectly smooth since the laser device can adjust the position within the range specified by the manufacturer. If the angle of curvature exceeds the model’s capabilities, you will hear a signal. In this case, you will need to adjust the legs manually. The bubble level inside the device will help you with this. For any miscalculations, we recommend using the metric conversions chart.

All levels have two buttons. One is responsible for drawing the horizontal; the other is the vertical. If you press the keys several times, you can draw additional rays or remove unnecessary ones not to waste the battery.

You need to lock the pendulum calibration to draw lines at an angle. There is a unique key on the case for this. After pressing it, you can use the equipment at an angle without being distracted by error signals.

Vertical adjustment is done using a special tripod, if included. If it’s not there, it won’t stop you from working. The tool can be used on any stable support. The main thing is that its height corresponds to the assigned tasks. If you need to rotate the device horizontally, use special screws for adjustment. If they are missing, rotate the housing manually to the desired position.